Skip to content

Basler SLP Cable, M8 6p/TBL-S#

SLP cable for power and I/O with M8 6-pin and TBL connectors.

Basler SLP Cable, M8 6p/TBL-S

Info

The cable is suitable to connect ace 2 and boost cameras with Basler Camera Lights.

Order Number Cable Length
2200001008 3 m

Cable Drawing#

Cable Drawing

Wiring Information#

Info

If you supply power to the camera via USB or PoE, don't connect the wire to the pin 1 of the terminal block connector.

Pin Number (HRS) Wire Color Function Pin Number (TBL)
1 Brown Camera Power 1
2 White Not connected
3 Blue Not connected
4 Black Not connected
5 Gray GPIO 3
6 Pink Ground 2
Housing Black Shielding 2

Physical Specifications#

Camera-side Connector M8 6-pin male
Host-side Connector Würth, TBL 381C
Cable Cross-section 0.25 mm² (close to AWG24)
Cable Diameter 5.7 mm
Wire Insulation PVC
Outer Jacket PUR
Minimum Bending Radius None (fixed installation only)
Maximum Bending Cycles None (fixed installation only)
Suitable for Drag Chain Applications No
Suitable for Robotics Applications No

Electrical Specifications#

Maximum Operating Voltage 30 VDC
Wire Resistance approx. 0.4 Ω

Environmental Specifications#

Operating Temperature Range -25–80 °C, not moving

Plug Specifications#

Contact Resistance 20 mΩ
Contact Plating Tin
Protection Rating UL 94 V-0
Plug Insulation Material PA66

General Information#

Conformity CE (includes RoHS)
Certificates for your cable
For more information, see the Compliance section of the Basler website.
Warranty 3 years

Read the topic about your camera model before connecting the cable to the camera. You can find the corresponding topic in the Area and Line Scan Cameras section.