Power Supply 24V, HRS HR10A, 4P
The Power Supply 24V, HRS HR10A, 4P (order number 2200001238) is recommended for use with Basler boost V cameras.
This is a power supply for 24 VDC with a male Hirose 4-pin plug.
Mechanical Specifications
Power Supply Dimensions
Power Supply and Output Cable Setup
Physical Specifications
| |
| DC Output Connector | Hirose 6-pin (part number HR10A-7P-4P) |
| AC Input Connector | IEC 60320 C14 |
| Housing Dimensions | 121.0 x 52.0 x 33.0 ±1 mm |
| Housing Material | 94V-0 Polycarbonate, non-vented |
| Cable Diameter | Approx. 4 mm |
| Suitable for Drag Chain Applications | No |
| Suitable for Robotics Applications | No |
Electrical Specifications
| |
| Voltage Range | 100–240 VAC |
| Frequency Range | 50–60 Hz |
DC Output
| |
| Voltage Range | 24 VDC ±5 % |
| Max. Input Current | 2.5 A |
| Max. Output Power Rating | 60 W |
| Dielectric Withstand Voltage | 4242 VDC
(from primary to secondary) |
| Earth Leakage Current | <3.5 mA @ 240 VAC |
| Touch Current | <0.25 mA @ 240 VAC |
Protection Specifications
| |
| Overvoltage | Electronically protected Zener clamp across the output |
| Short Circuit | Electronically protected unit will auto-recover upon removal of fault |
Environmental Specifications
| |
| Storage Temperature | -20–70 °C (-4–158°F) |
| Operating Temperature | 0–40 °C (32–104°F) |
| Humidity | 10–90 %, relative, non-condensing |
General Specifications
| |
| MTBF | 1,500,000 hrs @ 25 °C, full load |
| Energy Efficiency | USA DOE Level VI / Eco-design Directive 2009/125/EC, (EU) 2019/1782 |
Plug Specifications
| |
| Conformity | CE (includes RoHS), FCC, CCC, UKCA |
| Warranty | 1 year |