PLTransportLayer Class#
Inheritance Hierarchy#
System.Object
Basler.Pylon.PLTransportLayer
Properties#
| Name | Description | |
|---|---|---|
  | AreaTriggerMode | Sets the trigger mode of the area trigger signal. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| AutomaticFormatControl | Enables/disables automatic control of the pixel format in the device. If enabled, the frame grabber's pixel format and its dependencies are automatically updated to match the camera's pixel format setting. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| AutomaticROIControl | Activates or deactivates the automatic control of the ROI in the Device. If this feature is active, the frame grabber ROI is automatically updated to the camera one. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| AutomaticTapGeometryControl | Activates or deactivates the automatic control of the Tap Geometry in the Device. If this feature is active, the frame grabber Tap Geometry is automatically updated to the camera one. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| BitAlignment | Sets the alignment of the bits in the output format. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| CommandDuplicationEnable | Enables sending all commands and receiving all acknowledges twice. This option should only be enabled in case of network problems. Applies to: GigE and blaze Visibility: Guru The feature documentation may provide more information. |
| CompatibilityStatusAutomaticRoiControl | Automatic ROI control status of the device. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| CompatibilityStatusPixelFormat | Pixelformat status of the device. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| CompatibilityStatusTapGeometry | Tap geometry status of the device. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ConnectionGuardEnable | Enables the automatic start of the PylonGigEConnectionGuard. Applies to: GigE Visibility: Guru The feature documentation may provide more information. |
| CorrectedErrorCount | Number of errors corrected. This parameter indicates single-byte error correction in CXP stream packets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| CustomBitShiftRight | User-defined bit shift to the right. This allows you to shift the pixel data in the output format to the right by a value of your choice. The Alignment parameter has to be set to CustomBitShift for this. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| CustomSignalEvent0Polarity | Select the signal polarity for the custom signal event 0 Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| CustomSignalEvent0Source | Select the signal source for the custom signal event 0. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| CustomSignalEvent1Polarity | Select the signal polarity for the custom signal event 1 Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| CustomSignalEvent1Source | Select the signal source for the custom signal event 1 Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| CxpLinkConfiguration | Sets the link configuration for the communication between the receiver and transmitter device. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| CxpLinkTrigger0Source | Sets the output source for CXP LinkTrigger0. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| CxpLinkTrigger0SourceEdge | Selects the signal edge of the output signal on CXPLinkTrigger0. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| CxpLinkTrigger1Source | Sets the output source for CXP LinkTrigger1. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| CxpLinkTrigger1SourceEdge | Selects the signal edge of the output signal on CXP LinkTrigger1. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| CxpLinkTrigger2Source | Sets the output source for CXP LinkTrigger2. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| CxpLinkTrigger2SourceEdge | Selects the signal edge of the output signal on CXP LinkTrigger2. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| CxpLinkTrigger3Source | Sets the output source CXP LinkTrigger3. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| CxpLinkTrigger3SourceEdge | Selects the signal edge of the output signal on CXP LinkTrigger3. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| DeviceAccessStatus | Returns the device's access status at the moment when the Device Update List command was last executed. This value only changes when the Device Update List command is executed. Applies to: CoaXPress and blaze Visibility: Expert The feature documentation may provide more information. |
| DeviceDisplayName | User-friendly name of the device. Applies to: CoaXPress and blaze Visibility: Expert The feature documentation may provide more information. |
| DeviceEndianessMechanism | Sets the endianness handling mode. Applies to: blaze Visibility: Expert The feature documentation may provide more information. |
| DeviceID | Interface-wide unique ID of the selected device. This value only changes when the Device Update List command is executed. Applies to: CoaXPress and blaze Visibility: Expert The feature documentation may provide more information. |
| DeviceManufacturerInfo | Additional information about the manufacturer of the device. Applies to: blaze Visibility: Beginner The feature documentation may provide more information. |
| DeviceModelName | Name of the device model. This value only changes when the Device Update List command is executed. Applies to: CoaXPress and blaze Visibility: Beginner The feature documentation may provide more information. |
| DeviceSerialNumber | Serial number of the remote device. This value only changes when the Device Update List command is executed. Applies to: blaze Visibility: Expert The feature documentation may provide more information. |
| DeviceType | Returns the transport layer of the device. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| DeviceVendorName | Name of the device vendor. This value only changes when the Device Update List command is executed. Applies to: CoaXPress and blaze Visibility: Beginner The feature documentation may provide more information. |
| DigitalInput | Read the current state of all digital inputs. You can read the current state of these inputs using this parameter. LSB Bit 0 of the read value represents input 0, bit 1 represents input 1 and so on. Bits 0 to 7 use GPI 0 to 7. Front GPI 0 to 3 are represented by bits 8 to 11. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventAcquisitionTrigger | AcquisitionTrigger Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventAcquisitionTriggerSoftCounter | Software counter for event 'AcquisitionTrigger' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventAcquisitionTriggerTimestamp | Timestamp of event 'AcquisitionTrigger' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventDeviceLost | Returns the unique Identifier of the Device Lost event. Applies to: CoaXPress and blaze Visibility: Expert The feature documentation may provide more information. |
| EventDeviceLostSoftCounter | Software counter for event 'DeviceLost' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventFrameTransferEnd | FrameTransferEnd Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventFrameTransferEndSoftCounter | Software counter for event 'FrameTransferEnd' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventFrameTransferEndTimestamp | Timestamp of event 'FrameTransferEnd' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventFrameTransferStart | FrameTransferStart Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventFrameTransferStartSoftCounter | Software counter for event 'FrameTransferStart' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventFrameTransferStartTimestamp | Timestamp of event 'FrameTransferStart' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventFrameTriggerMissed | FrameTriggerMissed Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventFrameTriggerMissedSoftCounter | Software counter for event 'FrameTriggerMissed' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventFrameTriggerMissedTimestamp | Timestamp of event 'FrameTriggerMissed' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventLineTransferEnd | LineTransferEnd Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventLineTransferEndSoftCounter | Software counter for event 'LineTransferEnd' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventLineTransferEndTimestamp | Timestamp of event 'LineTransferEnd' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventLineTransferStart | LineTransferStart Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventLineTransferStartSoftCounter | Software counter for event 'LineTransferStart' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventLineTransferStartTimestamp | Timestamp of event 'LineTransferStart' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventNotification | Sets whether the host application is notified of the selected event. Applies to: CoaXPress and blaze Visibility: Expert Selected by: EventSelector The feature documentation may provide more information. |
| EventOverflow | Overflow Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventOverflowFrameId | Camera frame-ID for area scan applets or grabber frame-ID for line scan applets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventOverflowIsComplete | Frame is complete. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventOverflowIsEndOfSequence | Marks the end of a sequence. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventOverflowIsLost | Frame is lost. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventOverflowIsTruncated | Frame is truncated. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventOverflowSoftCounter | Software counter for event 'Overflow' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventOverflowTimestamp | Timestamp of event 'Overflow' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventSelector | Sets which event to signal to the host application. Applies to: CoaXPress and blaze Visibility: Expert Selecting Parameters: EventNotification The feature documentation may provide more information. |
| EventTriggerExceededPeriodLimits | TriggerExceededPeriodLimits Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventTriggerExceededPeriodLimitsSoftCounter | Software counter for event 'TriggerExceededPeriodLimits' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventTriggerExceededPeriodLimitsTimestamp | Timestamp of event 'TriggerExceededPeriodLimits' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventTriggerQueueFilllevelThresholdOff | TriggerQueueFilllevelThresholdOff Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventTriggerQueueFilllevelThresholdOffSoftCounter | Software counter for event 'TriggerQueueFilllevelThresholdOff' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventTriggerQueueFilllevelThresholdOffTimestamp | Timestamp of event 'TriggerQueueFilllevelThresholdOff' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventTriggerQueueFilllevelThresholdOn | TriggerQueueFilllevelThresholdOn Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventTriggerQueueFilllevelThresholdOnSoftCounter | Software counter for event 'TriggerQueueFilllevelThresholdOn' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| EventTriggerQueueFilllevelThresholdOnTimestamp | Timestamp of event 'TriggerQueueFilllevelThresholdOn' Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ExSyncOn | Enables or disables the ExSync output to the camera. Make sure that the camera is expecting this signal and interprets it in the expected way. The polarity of this signal is relevant for proper functionality. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ExSyncPolarity | Sets the polarity of the ExSync output signal. Adjusts the polarity of the Exsync signal genarator to the polarity accepted by the connected camera. Use LowActive, if the camera starts exposure on a falling edge, otherwise use HighActive. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| FillLevel | Current buffer fill level. This value allows you to check whether the average input bandwidth of the camera is too high to be processed by the applet. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| FlashOn | Switches the flash signal on or off. The pulse width of the flash signal is equal to one line period. The flash gives a signal between the first and second Exsync rising edge. A single trigger is sent for a full frame. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| FlashPolarity | Sets the generated flash signal polarity. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| Format | Sets the pixel format of the image that is output to the computer. The data is converted from the internal bit width and color format to the output format selected. This setting is not related to the pixel format input from the camera sensor. For more information, see the Pixel Format parameter documentation. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| FrontGPI | Current input signal levels of all front GPI inputs (bit mask). Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| GentlInfoIgnorefgformat | Ignore the FG output format and manage it internally in the GenTL producer Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| GentlInfoVersion | Version of the GenTL description Interface in the applet. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| GevDeviceGateway | Current gateway IP address of the GVCP interface of the remote device. Applies to: blaze Visibility: Expert The feature documentation may provide more information. |
| GevDeviceIPAddress | Current IP address of the GVCP interface of the remote device. Applies to: blaze Visibility: Expert The feature documentation may provide more information. |
| GevDeviceMACAddress | 48-bit MAC address of the GVCP interface of the remote device. Applies to: blaze Visibility: Expert The feature documentation may provide more information. |
| GevDeviceSubnetMask | Current subnet mask of the GVCP interface of the remote device. Applies to: blaze Visibility: Expert The feature documentation may provide more information. |
| GPI | The current input signal levels of all GPI inputs (bitmask). Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| HeartbeatTimeout | Heartbeat timeout value on the host side in milliseconds. This parameter is linked with the Heartbeat Timeout camera parameter. If the camera parameter changes, the host parameter changes accordingly, and vice versa. Applies to: GigE Visibility: Beginner The feature documentation may provide more information. |
| Height | Height of the image ROI on the host side. This parameter is linked with the Height camera parameter. If the camera parameter changes, the host parameter changes accordingly, but not vice versa. The host parameter should not be set to a value different from the camera parameter. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ImageSelect | Defines which image of an image sequence is grabbed. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ImageSelectPeriod | Selects the length of an image sequence. Only one single image of the sequence is grabbed. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ImageTriggerAsyncHeight | The total image height in lines in case of multi buffer mode. Only relevant if a Multibuffer image trigger mode is used. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ImageTriggerDebouncing | The debouncing time of the input image trigger. Signals must keep the same state during the debounce time to be detected as such. Fast signal changes within the debounce time are filtered out. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ImageTriggerGateDelay | The delay of the image gate in lines with respect to ExSync. The image trigger is delayed by a defined number of lines. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ImageTriggerInputPolarity | Sets the polarity of the image trigger input. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ImageTriggerInputSource | Sets the image trigger input signal source, which is used to trigger the image acquisition. This is only relevant if the Image Trigger Mode is set to Extern/Gate. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ImageTriggerIsBusy | With this read-only value it is possible to check whether the image trigger is busy, i.e. whether an image is currently being acquired. During this time an additional image trigger is ignored. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ImageTriggerMode | Sets the trigger mode for the image generation. An image trigger can define the start and length of an image. FreeRun: All incoming lines received from the camera are accepted. Image size is defined by the ROI. ASync_External_Trigger: At the rising edge of an accepted image trigger input signal, a new frame is started and incoming lines are appended to an image up to ROI-Height. A new rising edge of the image trigger is only accepted after the current frame is finished. Gated_External_Trigger: In gated mode, the input signal active state Sets the height of the resulting frame. ROI-Height is the maximum height. _Multibuffer modes can handle a certain number of lines for multiple frames of ROI size. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ImageTriggerOn | Enables or disables the image trigger module. The OFF state corresponds to FreeRun. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LineDownscale | The downscale factor of the line trigger input signal. Specifies the number of external input trigger signals, which are needed to generate a single Exsync. This is only relevant if the TriggerMode is set to an external ASync_trigger mode. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LineDownscaleInit | The phase of the downscaling with respect to the image gate. Specifies the number of external input signals, which are needed to generate the first Exsync of a frame. Exsync is used to trigger lines. This is only relevant if the TriggerMode is set to ASync_Trigger_Gated. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LineExposure | The length of the ExSync signal pulse. This parameter specifies the pulse width of the Exsync signal, which can be used by many cameras as externally defined exposure time. With this parameter it is possible to adjust the exposure time during runtime via software, even while grabbing. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LinePeriod | The length of the ExSync period. This parameter defines the line frequency when using the grabber controlled mode to send a trigger signal to the connected camera. The value of the line period needs to be greater than the line delay. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LineTriggerDebouncing | Specifies the debouncing time of the input line trigger, events, IO forwards and analyzers. The signals must keep the same state during the debounce time to be detected as such. Fast signal changes within the debounce time will be filtered out. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LineTriggerDelay | The delay of the ExSync signal with respect to the trigger input signal. Specifies the delay of the generated ExSync signal, with respect to an external trigger input. The resulting ExSync2 signal is a delayed clone of the ExSync. Polarity, period, etc. are the same as for ExSync. The line delay needs to be less than the line period even for external trigger modes where the internal line period is not used. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LineTriggerInPolarity | Sets the polarity of the external input trigger signal encoder source A and source B. When set to LowActive, the Exsync generator starts on a falling edge of the signal specified as frame trigger. Otherwise, the Exsync generation starts on a rising edge. This is only relevant if the TriggerMode is set to Extern_Trigger. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LineTriggerInSource | Sets the trigger input signal source for the ExSync generation. This signal is also interpreted as source A when using a shaft encoder. This is only relevant, if the TriggerMode is set to ASync_Trigger. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LineTriggerMode | Sets the operation mode for the Exsync signal generation. The source for the external trigger input can be selected via the parameters SourceA and SourceB. Grabber_Controlled: Exsync is generated periodically by the internal signal generator. ASync_Trigger: Each external trigger signal from a peripheral device is used to generate an ExSync based on the defined exposure time. Grabber_Controlled_Gated: Exsync is generated periodically by the internal signal generator during the acquisition of a frame. Extern_Trigger_Gated: An external trigger signal from a peripheral device is used to generate the ExSync during the acquisition of a frame only. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LinkCommandRetryCount | Specifies maximum number of tries before failing the control channel commands. Applies to: blaze Visibility: Guru The feature documentation may provide more information. |
| LinkCommandTimeout | Specifies application timeout for the control channel communication. Up to DeviceLinkCommandRetryCount attempts with this timeout are made before a command fails with a timeout error. Applies to: blaze Visibility: Beginner The feature documentation may provide more information. |
| LutCustomFile | Filename with custom lookup table values. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LutEnable | Switch the LUT and processing functionality on or off. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LutImplementationType | Type of LUT implementation. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LutInputPixelBitDepth | The pixel's bit depth at the lookup table input. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LutOutputPixelBitDepth | The pixel's bit depth at the lookup table output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LutSaveFile | Save current LUT configuration. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LutType | Enables the LUT to be loaded with custom values or uses the applet's processor. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LutValue | Field with LUT Values. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LutValueBlue | Field with blue LUT Values. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LutValueBlueSelector | Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LutValueGreen | Field with green LUT Values. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LutValueGreenSelector | Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LutValueRed | Field with red LUT Values. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LutValueRedSelector | Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| LutValueSelector | Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| MaxRetryCountRead | Maximum number of retries for read operations after a read operation has timed out. Applies to: GigE Visibility: Guru The feature documentation may provide more information. |
| MaxRetryCountWrite | Maximum number of retries for write operations after a write operation has timed out. Applies to: GigE Visibility: Guru The feature documentation may provide more information. |
| MigrationModeEnable | Enables mapping of certain SFNC 1.x node names to SFNC 2.x node names. This allows you to write code for camera devices that are compatible with different SFNC (Standard Features Naming Convention) versions. Available for USB camera devices only. Applies to: GigE and USB Visibility: Guru The feature documentation may provide more information. |
| MissingCameraFrameResponse | Returns whether missing frames are reported. If no frame is received for a trigger pulse, the parameter is set to Yes. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| MissingCameraFrameResponseClear | Clears the Missing Camera Frame Response parameter. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| OffsetX | X-offset of the acquisition ROI, independent of the camera ROI. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| OffsetY | Y-offset of the acquisition ROI, independent of the camera ROI. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| OutputPackedFormats | Automatically outputs packed formats instead of unpacked ones. This parameter is only available if the Automatic Format Control parameter is enabled. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| Overflow | Indicates whether if the image buffer is currently in overflow state. An overflow results in the loss of images. The parameter is reset at each readout cycle. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| OverflowEventSelect | An overflow event can be generated on each incomplete, lost or correct frame. With this enumeration, you can select which permutation of these three events is reported via overflow event. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| OverflowOffThreshold | Overflow handling will be inactive once the buffer filllevel is below this value. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| OverflowOnThreshold | Overflow handling will be active once the buffer filllevel is above this value. Frames will be interrupted. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| OverflowSyncOnThreshold | Overflow handling will be active once the buffer filllevel is above this value, after the currently active frame is completed. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| PacketTagErrorCount | Number of packet errors. This parameter indicates that CXP stream packets are lost. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| PixelDepth | Applet-internal processing bit depth. This is the maximum bit depth at which pixels are processed. If you select a highter output and input bit depth, data may be truncated. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| PixelFormat | Sets the format of the pixel data transmitted by the camera. This setting has to match the pixel format set in the camera. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ProcessingGain | Gain correction value. Available when LUT functionality is enabled. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ProcessingGamma | Gamma correction value. Available when LUT functionality is enabled. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ProcessingInvert | Invert output. Available when LUT functionality is enabled. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ProcessingOffset | Offset correction value. Available when LUT functionality is enabled. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ReadTimeout | Read access timeout value in milliseconds. Applies to: GigE Visibility: Beginner The feature documentation may provide more information. |
| ScalingFactorBlue | The blue gain of the white balancing. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ScalingFactorGreen | The green gain of the white balancing. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ScalingFactorRed | The red gain of the white balancing. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SendSoftwareTrigger | Sends a software trigger pulse or adds pulses to the trigger queue if it is enabled. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SensorHeight | The sensor height in selected tap geometry. The value is ignored, if vantage point = TopLeft. Available DRAM and SensorWidth limit the maximum SensorHeight. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SensorWidth | The sensor width in selected tap geometry. The value is ignored if, Vantage Point = Top-Left. Available DRAM and SensorHeight limit the maximum SensorWidth. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SetSoftwareTrigger | Turns software trigger signal on or off. With this parameter a software gate can be produced in case of an externally gated image trigger mode. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ShaftEncoderCompensationCount | Reads or writes the current compensation count. Value 0 refers to no compensation. You can reset the compensator by writing 0 to the parameter. Is based on a 20-bit counter enabling a backward movement of up to 1048576 steps. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ShaftEncoderCompensationEnable | Enables or disables the shaft encoder rollback compensation. This parameter is relevant in case of a shaft encoder AB configuration. If switched to ON, in case of shaft encoder backward movement, the operator counts how many shaft encoder steps the shaft encoder moves backwards. When the shaft encoder moves forwards again, this number of shaft encoder steps (now forward direction) is not transmitted as external trigger signals. Only after the transportation belt is back to the place where the backward movement started, the shaft encoder steps (forward direction) are transmitted as external trigger signals again. If switched to OFF, the operator simply doesn't transmit any trigger signals as long as the transportation belt moves backwards. As soon as the transport belt starts to move forwards again, the operator transmits the shaft encoder steps (forward direction) as trigger signals. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ShaftEncoderInputSource | Sets the trigger input signal source for the ExSync generation. This signal is also interpreted as source B when using a shaft encoder. This is only relevant if the TriggerMode is set to ASync_Trigger. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ShaftEncoderLeading | Sets the leading signal / direction for the shaft encoder. A foreward movement is defined by a rising edge of signal A before signal B, if the parameter is set to Signal_AB. Source_A: Forward is defined by A before B. Source_B: Forward is defined by B before A. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ShaftEncoderMode | Sets the shaft encoder mode. Filter_x1: Exsync is generated for a forward rotation of the shaft encoder in single resolution, i.e., a trigger pulse for a rising edge of LineTrgInSourceA. Filter_x2: Exsync is generated for a forward rotation of the shaft encoder in double resolution, i.e., a trigger pulse for a rising edge of LineTrgInSourceA and a rising edge of LineTrgInSourceB. Filter_x4: Exsync is generated for a forward rotation of the shaft encoder in quad resolution, i.e., a trigger pulse for a rising and a falling edge of LineTrgInSourceA and a rising and a falling edge of LineTrgInSourceB. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| ShaftEncoderOn | Enables or disbales the shaft encoder. Sets whether a single trigger input (off = A only) is used for the Exsync generation, or the signals A and B (on). Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SignalAnalyzer0CurrentPeriod | Returns the last measured period of the selected source and polarity. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SignalAnalyzer0MaxPeriod | Returns the maximum measured period of the selected source and polarity after reset. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SignalAnalyzer0MinPeriod | Returns the minimum measured period of the selected source and polarity after reset. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SignalAnalyzer0Polarity | Sets the signal analyzer 0 polarity. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SignalAnalyzer0PulseCount | Returns the number of rising edges e.g. pulses of the selected source and of the polarity after reset. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SignalAnalyzer0Source | Sets the signal source analyzer module 0. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SignalAnalyzer1CurrentPeriod | Returns the last measured period of the selected source and polarity. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SignalAnalyzer1MaxPeriod | Returns the maximum measured period of the selected source and the polarity after reset. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SignalAnalyzer1MinPeriod | Returns the minimum measured period of the selected source and the polarity after reset. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SignalAnalyzer1Polarity | Sets the signal analyzer module 0 polarity. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SignalAnalyzer1PulseCount | Returns the number of rising edges e.g. pulses of the selected source and polarity after reset. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SignalAnalyzer1Source | Sets the signal source analyzer module 0. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SignalAnalyzerClear | Clears all measurement results. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SignalAnalyzerPulseCountDifference | Use this read-only parameter to check the difference of the signal analyzer 0 and 1 pulse counter values (Analyzer 0 - Analyzer 1 value). This can be used to check for lost trigger signals, if analyzer 0 counts the ExSyc pulses and analyzer 1 counts the returned camera lines. In this case the difference is between 0 and 1 for single line cameras with no extra delay. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SoftwareTriggerIsBusy | Indicates whether the software trigger is busy. This allows you to find out whether the trigger system is still processing software trigger pulses. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SoftwareTriggerQueueFillLevel | Number of pulses in queue to be processed. The Queue parameter needs to be enabled for this. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| Statistic_Last_Error_Status | Last error status of a read or write operation. Applies to: USB Visibility: Expert The feature documentation may provide more information. |
| Statistic_Last_Error_Status_Text | Last error status of a read or write operation. Applies to: USB Visibility: Expert The feature documentation may provide more information. |
| Statistic_Read_Operations_Failed_Count | Number of failed read operations. Applies to: USB Visibility: Expert The feature documentation may provide more information. |
| Statistic_Read_Pipe_Reset_Count | Number of read pipe resets. Applies to: USB Visibility: Expert The feature documentation may provide more information. |
| Statistic_Write_Operations_Failed_Count | Number of failed write operations. Applies to: USB Visibility: Expert The feature documentation may provide more information. |
| Statistic_Write_Pipe_Reset_Count | Number of write pipe resets. Applies to: USB Visibility: Expert The feature documentation may provide more information. |
| StatisticReadWriteTimeoutCount | Number of timeouts during read and write operations when waiting for a response from the device. Applies to: GigE and blaze Visibility: Guru The feature documentation may provide more information. |
| StreamDisplayName | User-friendly name of the selected stream. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| StreamID | Device-wide unique ID of the data stream. Applies to: CoaXPress and blaze Visibility: Beginner Selected by: StreamSelector The feature documentation may provide more information. |
| StreamSelector | Sets the stream channel. The parameter is 0-based in order to match the index of the C interface. Applies to: CoaXPress and blaze Visibility: Beginner Selecting Parameters: StreamID The feature documentation may provide more information. |
| StrobePulseDelay | The delay of the flash signal in lines with respect to the image trigger input signal with respect to ExSync. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SystemmonitorByteAlignment8b10bLocked | Byte Alignment 8b10b locked Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorChannelCurrent | Returns the Channel Current. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorChannelCurrentSelector | Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorChannelVoltage | Returns the Channel Voltage. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorChannelVoltageSelector | Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorCurrentLinkSpeed | Returns the current PCIe link speed in Gibibyte (2^30 byte). Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorCxpImageLineMode | This parameter informs about the current transfer mode used by the camera. The transfer mode can be an area scan (= 0) or line scan (= 1) image. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SystemmonitorDisparity8b10bError | Disparity 8b 10b errors Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorExternalPower | Shows the external power state of the board. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorFpgaTemperature | Returns the current FPGA die temperature. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorFpgaVccAux | Returns the current FPGA auxiliary Vcc. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorFpgaVccBram | Returns the current FPGA BRAM Vcc. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorFpgaVccInt | Returns the current FPGA internal Vcc. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorNotInTable8b10bError | Not in table 8b 10b errors Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorPacketbufferOverflowCount | The number of overflows that occur due to a not correct package order. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SystemmonitorPacketbufferOverflowSource | The port, which has overflows due to a not correct package order. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| SystemmonitorPcieTrainedPayloadSize | Returns the PCIe trained payload size. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorPcieTrainedRequestSize | Returns the PCIe trained request size. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorPortBitRate | Returns the port bit rate Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorPowerOverCxpState | Shows the current power over CXP state. Applies to: CoaXPress Visibility: Beginner The feature documentation may provide more information. |
| SystemmonitorUsedCxpConnections | The currently used number of CXP ports used in this process. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TapGeometry | Select the tap geometry according to the GenICam SFNC. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerAcknowledgementCount | Number of trigger acknowledgement packets sent by the camera (in response to trigger edge packets sent before) have been received by the frame grabber. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerCameraOutSelect | Sets the output source to be connected to a camera signal channel. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerEventCount | Number of trigger events sent to the camera. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerExceededPeriodLimits | Returns whether the input signal frequency exceeded the maximum specified. If the parameter returns Yes, signals were dropped. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerExceededPeriodLimitsClear | Clears the Trigger Exceeded Period Limits parameter. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerFrontOutGPO0Polarity | Sets the front GPO 0 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerFrontOutGPO1Polarity | Sets the front GPO 1 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerInDebounce | Input debounce time for trigger input signals (in microseconds). This parameter allows you to filter out invalid signals by specifying a minimum signal length. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerInDownscale | Factor by which the trigger input signal is downscaled. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerInDownscalePhase | Phase for selecting the desired pulse in the sequence. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerInPolarity | Sets the polarity of the trigger input signal. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerInSource | Sets the trigger input source for external trigger mode. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerInStatisticsFrequency | Current frequency of the input pulses. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerInStatisticsMaximumFrequency | Maximum input frequency detected. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerInStatisticsMinimumFrequency | Minimum input frequency detected. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerInStatisticsMinMaxFrequencyClear | Clears the minimum and maximum frequency values. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerInStatisticsPolarity | Sets the polarity of the trigger input signal for statistics. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerInStatisticsPulseCount | Number of input pulses. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerInStatisticsPulseCountClear | Clears the input signal pulse counter. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerInStatisticsSource | Sets the trigger input source for statistics. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerMultiplyPulses | Upscales, i.e., duplicates, the number of trigger pulses generated externally or via software with the period specified by the Trigger Output Frequency parameter. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutFrontGPO0Source | Sets the signal source for the front GPO 0 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutFrontGPO1Source | Sets the signal source for the front GPO 1 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutGPO0Polarity | Sets the GPO 0 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutGPO0Source | Sets the signal source for GPO 0 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutGPO1Polarity | Sets the GPO 1 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutGPO1Source | Sets the signal source for GPO 1 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutGPO2Polarity | Sets the GPO 2 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutGPO2Source | Sets the signal source for GPO 2 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutGPO3Polarity | Sets the GPO 3 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutGPO3Source | Sets the signal source for GPO 3 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutGPO4Polarity | Sets the GPO 4 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutGPO4Source | Sets the signal source for GPO 4 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutGPO5Polarity | Sets the GPO 5 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutGPO5Source | Sets the signal source for GPO 5 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutGPO6Polarity | Sets the GPO 6 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutGPO6Source | Sets the signal source for GPO 6 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutGPO7Polarity | Sets the GPO 7 signal polarity. This parameter is ignored if the source is VCC or GND. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutGPO7Source | Sets the signal source for GPO 7 output. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutputEventSelect | Select the pulse form generator for event monitoring. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutputFrequency | Maximum trigger output frequency. If the internal generator is used, it will use the frequency specified there. If an external source is used, this value determines the maximum allowed value. External trigger signals exceeding this value will be discarded. For more information, see the applet documentation. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutSelectFrontGPO0 | Sets the output source of Front GPO 0. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutSelectFrontGPO1 | Sets the output source of Front GPO 1. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutSelectGPO0 | Sets the output source of GPO 0. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutSelectGPO1 | Sets the output source of GPO 1. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutSelectGPO2 | Sets the output source of GPO 2. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutSelectGPO3 | Sets the output source of GPO 3. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutSelectGPO4 | Sets the output source of GPO 4. This parameter is not available on Light Bridge. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutSelectGPO5 | Sets the output source of GPO 5. This parameter is not available on Light Bridge. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutSelectGPO6 | Sets the output source of GPO 6. This parameter is not available on Light Bridge. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutSelectGPO7 | Sets the output source of GPO 7. This parameter is not available on Light Bridge. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutStatisticsPulseCount | Number of output pulses. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutStatisticsPulseCountClear | Clears the output signal pulse counter. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerOutStatisticsSource | Sets the output source for statistics. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerPulseFormGenerator0Delay | Delay between the input and the output of the pulse form generator. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerPulseFormGenerator0Downscale | Downscale factor at the pulse form generator input. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerPulseFormGenerator0DownscalePhase | Phase for selecting the desired pulse in the sequence. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerPulseFormGenerator0Width | Width of the output signal. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerPulseFormGenerator1Delay | Delay between the input and the output of the pulse form generator. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerPulseFormGenerator1Downscale | Downscale factor at the pulse form generator input. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerPulseFormGenerator1DownscalePhase | Phase for selecting the desired pulse in the sequence. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerPulseFormGenerator1Width | Width of the output signal. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerPulseFormGenerator2Delay | Delay between the input and the output of the pulse form generator. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerPulseFormGenerator2Downscale | Downscale factor at the pulse form generator input. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerPulseFormGenerator2DownscalePhase | Phase for selecting the desired pulse in the sequence. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerPulseFormGenerator2Width | Width of the output signal. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerPulseFormGenerator3Delay | Delay between the input and the output of the pulse form generator. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerPulseFormGenerator3Downscale | Downscale factor at the pulse form generator input. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerPulseFormGenerator3DownscalePhase | Phase for selecting the desired pulse in the sequence. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerPulseFormGenerator3Width | Width of the output signal. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerQueueFillLevel | Fill level of the trigger queue. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerQueueFillLevelEventOffThreshold | The threshold for turning the queue fill level off. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerQueueFillLevelEventOnThreshold | The threshold for turning the queue fill level on. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerQueueMode | Enables/disable the trigger queue mode. The maximum output frequency is specified by the Trigger Output Frequency parameter. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerState | Sets the state of the trigger system. The state of the trigger system is related to the trigger mode. This parameter enables or disables the trigger processing. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| TriggerWaveViolation | Indicates a distance of two trigger edges violating the minimum edge frequency. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| UncorrectedErrorCount | Number of uncorrected errors. Bit[2] indicates multiple byte errors in CXP stream packets. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| VantagePoint | Vantage point. Use for mirroring. If VantagePoint is set to TopRight or BottomRight Width + XOffset must be smaller than SensorWidth. If VantagePoint is set to BottomLeft or BottomRight, the Height + YOffset must be smaller than SensorHeight. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| Width | Width of the image ROI on the host side. This parameter is linked with the Width camera parameter. If the camera parameter changes, the host parameter changes accordingly, but not vice versa. The host parameter should not be set to a value different from the camera parameter. Applies to: CoaXPress Visibility: Expert The feature documentation may provide more information. |
| WriteTimeout | Write access timeout in milliseconds. Applies to: GigE Visibility: Beginner The feature documentation may provide more information. |
PLTransportLayer.AreaTriggerMode Property#
Sets the trigger mode of the area trigger signal.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.AutomaticFormatControl Property#
Enables/disables automatic control of the pixel format in the device. If enabled, the frame grabber's pixel format and its dependencies are automatically updated to match the camera's pixel format setting.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.AutomaticROIControl Property#
Activates or deactivates the automatic control of the ROI in the Device. If this feature is active, the frame grabber ROI is automatically updated to the camera one.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.AutomaticTapGeometryControl Property#
Activates or deactivates the automatic control of the Tap Geometry in the Device. If this feature is active, the frame grabber Tap Geometry is automatically updated to the camera one.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.BitAlignment Property#
Sets the alignment of the bits in the output format.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.CommandDuplicationEnable Property#
Enables sending all commands and receiving all acknowledges twice. This option should only be enabled in case of network problems.
Applies to: GigE and blaze
Visibility: Guru
The feature documentation may provide more information.
PLTransportLayer.CompatibilityStatusAutomaticRoiControl Property#
Automatic ROI control status of the device.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.CompatibilityStatusPixelFormat Property#
Pixelformat status of the device.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.CompatibilityStatusTapGeometry Property#
Tap geometry status of the device.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ConnectionGuardEnable Property#
Enables the automatic start of the PylonGigEConnectionGuard.
Applies to: GigE
Visibility: Guru
The feature documentation may provide more information.
PLTransportLayer.CorrectedErrorCount Property#
Number of errors corrected. This parameter indicates single-byte error correction in CXP stream packets.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.CustomBitShiftRight Property#
User-defined bit shift to the right. This allows you to shift the pixel data in the output format to the right by a value of your choice. The Alignment parameter has to be set to CustomBitShift for this.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.CustomSignalEvent0Polarity Property#
Select the signal polarity for the custom signal event 0
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.CustomSignalEvent0Source Property#
Select the signal source for the custom signal event 0.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.CustomSignalEvent1Polarity Property#
Select the signal polarity for the custom signal event 1
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.CustomSignalEvent1Source Property#
Select the signal source for the custom signal event 1
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.CxpLinkConfiguration Property#
Sets the link configuration for the communication between the receiver and transmitter device.
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.CxpLinkTrigger0Source Property#
Sets the output source for CXP LinkTrigger0.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.CxpLinkTrigger0SourceEdge Property#
Selects the signal edge of the output signal on CXPLinkTrigger0.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.CxpLinkTrigger1Source Property#
Sets the output source for CXP LinkTrigger1.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.CxpLinkTrigger1SourceEdge Property#
Selects the signal edge of the output signal on CXP LinkTrigger1.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.CxpLinkTrigger2Source Property#
Sets the output source for CXP LinkTrigger2.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.CxpLinkTrigger2SourceEdge Property#
Selects the signal edge of the output signal on CXP LinkTrigger2.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.CxpLinkTrigger3Source Property#
Sets the output source CXP LinkTrigger3.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.CxpLinkTrigger3SourceEdge Property#
Selects the signal edge of the output signal on CXP LinkTrigger3.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.DeviceAccessStatus Property#
Returns the device's access status at the moment when the Device Update List command was last executed. This value only changes when the Device Update List command is executed.
Applies to: CoaXPress and blaze
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.DeviceDisplayName Property#
User-friendly name of the device.
Applies to: CoaXPress and blaze
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.DeviceEndianessMechanism Property#
Sets the endianness handling mode.
Applies to: blaze
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.DeviceID Property#
Interface-wide unique ID of the selected device. This value only changes when the Device Update List command is executed.
Applies to: CoaXPress and blaze
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.DeviceManufacturerInfo Property#
Additional information about the manufacturer of the device.
Applies to: blaze
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.DeviceModelName Property#
Name of the device model. This value only changes when the Device Update List command is executed.
Applies to: CoaXPress and blaze
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.DeviceSerialNumber Property#
Serial number of the remote device. This value only changes when the Device Update List command is executed.
Applies to: blaze
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.DeviceType Property#
Returns the transport layer of the device.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.DeviceVendorName Property#
Name of the device vendor. This value only changes when the Device Update List command is executed.
Applies to: CoaXPress and blaze
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.DigitalInput Property#
Read the current state of all digital inputs. You can read the current state of these inputs using this parameter. LSB Bit 0 of the read value represents input 0, bit 1 represents input 1 and so on. Bits 0 to 7 use GPI 0 to 7. Front GPI 0 to 3 are represented by bits 8 to 11.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventAcquisitionTrigger Property#
AcquisitionTrigger
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventAcquisitionTriggerSoftCounter Property#
Software counter for event 'AcquisitionTrigger'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventAcquisitionTriggerTimestamp Property#
Timestamp of event 'AcquisitionTrigger'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventDeviceLost Property#
Returns the unique Identifier of the Device Lost event.
Applies to: CoaXPress and blaze
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventDeviceLostSoftCounter Property#
Software counter for event 'DeviceLost'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventFrameTransferEnd Property#
FrameTransferEnd
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventFrameTransferEndSoftCounter Property#
Software counter for event 'FrameTransferEnd'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventFrameTransferEndTimestamp Property#
Timestamp of event 'FrameTransferEnd'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventFrameTransferStart Property#
FrameTransferStart
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventFrameTransferStartSoftCounter Property#
Software counter for event 'FrameTransferStart'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventFrameTransferStartTimestamp Property#
Timestamp of event 'FrameTransferStart'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventFrameTriggerMissed Property#
FrameTriggerMissed
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventFrameTriggerMissedSoftCounter Property#
Software counter for event 'FrameTriggerMissed'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventFrameTriggerMissedTimestamp Property#
Timestamp of event 'FrameTriggerMissed'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventLineTransferEnd Property#
LineTransferEnd
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventLineTransferEndSoftCounter Property#
Software counter for event 'LineTransferEnd'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventLineTransferEndTimestamp Property#
Timestamp of event 'LineTransferEnd'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventLineTransferStart Property#
LineTransferStart
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventLineTransferStartSoftCounter Property#
Software counter for event 'LineTransferStart'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventLineTransferStartTimestamp Property#
Timestamp of event 'LineTransferStart'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventNotification Property#
Sets whether the host application is notified of the selected event.
Applies to: CoaXPress and blaze
Visibility: Expert
Selected by: EventSelector
The feature documentation may provide more information.
PLTransportLayer.EventOverflow Property#
Overflow
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventOverflowFrameId Property#
Camera frame-ID for area scan applets or grabber frame-ID for line scan applets.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventOverflowIsComplete Property#
Frame is complete.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventOverflowIsEndOfSequence Property#
Marks the end of a sequence.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventOverflowIsLost Property#
Frame is lost.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventOverflowIsTruncated Property#
Frame is truncated.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventOverflowSoftCounter Property#
Software counter for event 'Overflow'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventOverflowTimestamp Property#
Timestamp of event 'Overflow'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventSelector Property#
Sets which event to signal to the host application.
Applies to: CoaXPress and blaze
Visibility: Expert
Selecting Parameters: EventNotification
The feature documentation may provide more information.
PLTransportLayer.EventTriggerExceededPeriodLimits Property#
TriggerExceededPeriodLimits
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventTriggerExceededPeriodLimitsSoftCounter Property#
Software counter for event 'TriggerExceededPeriodLimits'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventTriggerExceededPeriodLimitsTimestamp Property#
Timestamp of event 'TriggerExceededPeriodLimits'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventTriggerQueueFilllevelThresholdOff Property#
TriggerQueueFilllevelThresholdOff
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventTriggerQueueFilllevelThresholdOffSoftCounter Property#
Software counter for event 'TriggerQueueFilllevelThresholdOff'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventTriggerQueueFilllevelThresholdOffTimestamp Property#
Timestamp of event 'TriggerQueueFilllevelThresholdOff'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventTriggerQueueFilllevelThresholdOn Property#
TriggerQueueFilllevelThresholdOn
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventTriggerQueueFilllevelThresholdOnSoftCounter Property#
Software counter for event 'TriggerQueueFilllevelThresholdOn'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.EventTriggerQueueFilllevelThresholdOnTimestamp Property#
Timestamp of event 'TriggerQueueFilllevelThresholdOn'
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ExSyncOn Property#
Enables or disables the ExSync output to the camera. Make sure that the camera is expecting this signal and interprets it in the expected way. The polarity of this signal is relevant for proper functionality.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ExSyncPolarity Property#
Sets the polarity of the ExSync output signal. Adjusts the polarity of the Exsync signal genarator to the polarity accepted by the connected camera. Use LowActive, if the camera starts exposure on a falling edge, otherwise use HighActive.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.FillLevel Property#
Current buffer fill level. This value allows you to check whether the average input bandwidth of the camera is too high to be processed by the applet.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.FlashOn Property#
Switches the flash signal on or off. The pulse width of the flash signal is equal to one line period. The flash gives a signal between the first and second Exsync rising edge. A single trigger is sent for a full frame.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.FlashPolarity Property#
Sets the generated flash signal polarity.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.Format Property#
Sets the pixel format of the image that is output to the computer. The data is converted from the internal bit width and color format to the output format selected. This setting is not related to the pixel format input from the camera sensor. For more information, see the Pixel Format parameter documentation.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.FrontGPI Property#
Current input signal levels of all front GPI inputs (bit mask).
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.GentlInfoIgnorefgformat Property#
Ignore the FG output format and manage it internally in the GenTL producer
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.GentlInfoVersion Property#
Version of the GenTL description Interface in the applet.
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.GevDeviceGateway Property#
Current gateway IP address of the GVCP interface of the remote device.
Applies to: blaze
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.GevDeviceIPAddress Property#
Current IP address of the GVCP interface of the remote device.
Applies to: blaze
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.GevDeviceMACAddress Property#
48-bit MAC address of the GVCP interface of the remote device.
Applies to: blaze
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.GevDeviceSubnetMask Property#
Current subnet mask of the GVCP interface of the remote device.
Applies to: blaze
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.GPI Property#
The current input signal levels of all GPI inputs (bitmask).
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.HeartbeatTimeout Property#
Heartbeat timeout value on the host side in milliseconds. This parameter is linked with the Heartbeat Timeout camera parameter. If the camera parameter changes, the host parameter changes accordingly, and vice versa.
Applies to: GigE
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.Height Property#
Height of the image ROI on the host side. This parameter is linked with the Height camera parameter. If the camera parameter changes, the host parameter changes accordingly, but not vice versa. The host parameter should not be set to a value different from the camera parameter.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ImageSelect Property#
Defines which image of an image sequence is grabbed.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ImageSelectPeriod Property#
Selects the length of an image sequence. Only one single image of the sequence is grabbed.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ImageTriggerAsyncHeight Property#
The total image height in lines in case of multi buffer mode. Only relevant if a Multibuffer image trigger mode is used.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ImageTriggerDebouncing Property#
The debouncing time of the input image trigger. Signals must keep the same state during the debounce time to be detected as such. Fast signal changes within the debounce time are filtered out.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ImageTriggerGateDelay Property#
The delay of the image gate in lines with respect to ExSync. The image trigger is delayed by a defined number of lines.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ImageTriggerInputPolarity Property#
Sets the polarity of the image trigger input.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ImageTriggerInputSource Property#
Sets the image trigger input signal source, which is used to trigger the image acquisition. This is only relevant if the Image Trigger Mode is set to Extern/Gate.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ImageTriggerIsBusy Property#
With this read-only value it is possible to check whether the image trigger is busy, i.e. whether an image is currently being acquired. During this time an additional image trigger is ignored.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ImageTriggerMode Property#
Sets the trigger mode for the image generation. An image trigger can define the start and length of an image. FreeRun: All incoming lines received from the camera are accepted. Image size is defined by the ROI. ASync_External_Trigger: At the rising edge of an accepted image trigger input signal, a new frame is started and incoming lines are appended to an image up to ROI-Height. A new rising edge of the image trigger is only accepted after the current frame is finished. Gated_External_Trigger: In gated mode, the input signal active state Sets the height of the resulting frame. ROI-Height is the maximum height. _Multibuffer modes can handle a certain number of lines for multiple frames of ROI size.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ImageTriggerOn Property#
Enables or disables the image trigger module. The OFF state corresponds to FreeRun.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LineDownscale Property#
The downscale factor of the line trigger input signal. Specifies the number of external input trigger signals, which are needed to generate a single Exsync. This is only relevant if the TriggerMode is set to an external ASync_trigger mode.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LineDownscaleInit Property#
The phase of the downscaling with respect to the image gate. Specifies the number of external input signals, which are needed to generate the first Exsync of a frame. Exsync is used to trigger lines. This is only relevant if the TriggerMode is set to ASync_Trigger_Gated.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LineExposure Property#
The length of the ExSync signal pulse. This parameter specifies the pulse width of the Exsync signal, which can be used by many cameras as externally defined exposure time. With this parameter it is possible to adjust the exposure time during runtime via software, even while grabbing.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LinePeriod Property#
The length of the ExSync period. This parameter defines the line frequency when using the grabber controlled mode to send a trigger signal to the connected camera. The value of the line period needs to be greater than the line delay.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LineTriggerDebouncing Property#
Specifies the debouncing time of the input line trigger, events, IO forwards and analyzers. The signals must keep the same state during the debounce time to be detected as such. Fast signal changes within the debounce time will be filtered out.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LineTriggerDelay Property#
The delay of the ExSync signal with respect to the trigger input signal. Specifies the delay of the generated ExSync signal, with respect to an external trigger input. The resulting ExSync2 signal is a delayed clone of the ExSync. Polarity, period, etc. are the same as for ExSync. The line delay needs to be less than the line period even for external trigger modes where the internal line period is not used.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LineTriggerInPolarity Property#
Sets the polarity of the external input trigger signal encoder source A and source B. When set to LowActive, the Exsync generator starts on a falling edge of the signal specified as frame trigger. Otherwise, the Exsync generation starts on a rising edge. This is only relevant if the TriggerMode is set to Extern_Trigger.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LineTriggerInSource Property#
Sets the trigger input signal source for the ExSync generation. This signal is also interpreted as source A when using a shaft encoder. This is only relevant, if the TriggerMode is set to ASync_Trigger.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LineTriggerMode Property#
Sets the operation mode for the Exsync signal generation. The source for the external trigger input can be selected via the parameters SourceA and SourceB. Grabber_Controlled: Exsync is generated periodically by the internal signal generator. ASync_Trigger: Each external trigger signal from a peripheral device is used to generate an ExSync based on the defined exposure time. Grabber_Controlled_Gated: Exsync is generated periodically by the internal signal generator during the acquisition of a frame. Extern_Trigger_Gated: An external trigger signal from a peripheral device is used to generate the ExSync during the acquisition of a frame only.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LinkCommandRetryCount Property#
Specifies maximum number of tries before failing the control channel commands.
Applies to: blaze
Visibility: Guru
The feature documentation may provide more information.
PLTransportLayer.LinkCommandTimeout Property#
Specifies application timeout for the control channel communication. Up to DeviceLinkCommandRetryCount attempts with this timeout are made before a command fails with a timeout error.
Applies to: blaze
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.LutCustomFile Property#
Filename with custom lookup table values.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LutEnable Property#
Switch the LUT and processing functionality on or off.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LutImplementationType Property#
Type of LUT implementation.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LutInputPixelBitDepth Property#
The pixel's bit depth at the lookup table input.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LutOutputPixelBitDepth Property#
The pixel's bit depth at the lookup table output.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LutSaveFile Property#
Save current LUT configuration.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LutType Property#
Enables the LUT to be loaded with custom values or uses the applet's processor.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LutValue Property#
Field with LUT Values.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LutValueBlue Property#
Field with blue LUT Values.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LutValueBlueSelector Property#
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LutValueGreen Property#
Field with green LUT Values.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LutValueGreenSelector Property#
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LutValueRed Property#
Field with red LUT Values.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LutValueRedSelector Property#
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.LutValueSelector Property#
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.MaxRetryCountRead Property#
Maximum number of retries for read operations after a read operation has timed out.
Applies to: GigE
Visibility: Guru
The feature documentation may provide more information.
PLTransportLayer.MaxRetryCountWrite Property#
Maximum number of retries for write operations after a write operation has timed out.
Applies to: GigE
Visibility: Guru
The feature documentation may provide more information.
PLTransportLayer.MigrationModeEnable Property#
Enables mapping of certain SFNC 1.x node names to SFNC 2.x node names. This allows you to write code for camera devices that are compatible with different SFNC (Standard Features Naming Convention) versions. Available for USB camera devices only.
Applies to: GigE and USB
Visibility: Guru
The feature documentation may provide more information.
PLTransportLayer.MissingCameraFrameResponse Property#
Returns whether missing frames are reported. If no frame is received for a trigger pulse, the parameter is set to Yes.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.MissingCameraFrameResponseClear Property#
Clears the Missing Camera Frame Response parameter.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.OffsetX Property#
X-offset of the acquisition ROI, independent of the camera ROI.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.OffsetY Property#
Y-offset of the acquisition ROI, independent of the camera ROI.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.OutputPackedFormats Property#
Automatically outputs packed formats instead of unpacked ones. This parameter is only available if the Automatic Format Control parameter is enabled.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.Overflow Property#
Indicates whether if the image buffer is currently in overflow state. An overflow results in the loss of images. The parameter is reset at each readout cycle.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.OverflowEventSelect Property#
An overflow event can be generated on each incomplete, lost or correct frame. With this enumeration, you can select which permutation of these three events is reported via overflow event.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.OverflowOffThreshold Property#
Overflow handling will be inactive once the buffer filllevel is below this value.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.OverflowOnThreshold Property#
Overflow handling will be active once the buffer filllevel is above this value. Frames will be interrupted.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.OverflowSyncOnThreshold Property#
Overflow handling will be active once the buffer filllevel is above this value, after the currently active frame is completed.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.PacketTagErrorCount Property#
Number of packet errors. This parameter indicates that CXP stream packets are lost.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.PixelDepth Property#
Applet-internal processing bit depth. This is the maximum bit depth at which pixels are processed. If you select a highter output and input bit depth, data may be truncated.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.PixelFormat Property#
Sets the format of the pixel data transmitted by the camera. This setting has to match the pixel format set in the camera.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ProcessingGain Property#
Gain correction value. Available when LUT functionality is enabled.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ProcessingGamma Property#
Gamma correction value. Available when LUT functionality is enabled.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ProcessingInvert Property#
Invert output. Available when LUT functionality is enabled.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ProcessingOffset Property#
Offset correction value. Available when LUT functionality is enabled.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ReadTimeout Property#
Read access timeout value in milliseconds.
Applies to: GigE
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.ScalingFactorBlue Property#
The blue gain of the white balancing.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ScalingFactorGreen Property#
The green gain of the white balancing.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ScalingFactorRed Property#
The red gain of the white balancing.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SendSoftwareTrigger Property#
Sends a software trigger pulse or adds pulses to the trigger queue if it is enabled.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SensorHeight Property#
The sensor height in selected tap geometry. The value is ignored, if vantage point = TopLeft. Available DRAM and SensorWidth limit the maximum SensorHeight.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SensorWidth Property#
The sensor width in selected tap geometry. The value is ignored if, Vantage Point = Top-Left. Available DRAM and SensorHeight limit the maximum SensorWidth.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SetSoftwareTrigger Property#
Turns software trigger signal on or off. With this parameter a software gate can be produced in case of an externally gated image trigger mode.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ShaftEncoderCompensationCount Property#
Reads or writes the current compensation count. Value 0 refers to no compensation. You can reset the compensator by writing 0 to the parameter. Is based on a 20-bit counter enabling a backward movement of up to 1048576 steps.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ShaftEncoderCompensationEnable Property#
Enables or disables the shaft encoder rollback compensation. This parameter is relevant in case of a shaft encoder AB configuration. If switched to ON, in case of shaft encoder backward movement, the operator counts how many shaft encoder steps the shaft encoder moves backwards. When the shaft encoder moves forwards again, this number of shaft encoder steps (now forward direction) is not transmitted as external trigger signals. Only after the transportation belt is back to the place where the backward movement started, the shaft encoder steps (forward direction) are transmitted as external trigger signals again. If switched to OFF, the operator simply doesn't transmit any trigger signals as long as the transportation belt moves backwards. As soon as the transport belt starts to move forwards again, the operator transmits the shaft encoder steps (forward direction) as trigger signals.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ShaftEncoderInputSource Property#
Sets the trigger input signal source for the ExSync generation. This signal is also interpreted as source B when using a shaft encoder. This is only relevant if the TriggerMode is set to ASync_Trigger.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ShaftEncoderLeading Property#
Sets the leading signal / direction for the shaft encoder. A foreward movement is defined by a rising edge of signal A before signal B, if the parameter is set to Signal_AB. Source_A: Forward is defined by A before B. Source_B: Forward is defined by B before A.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ShaftEncoderMode Property#
Sets the shaft encoder mode. Filter_x1: Exsync is generated for a forward rotation of the shaft encoder in single resolution, i.e., a trigger pulse for a rising edge of LineTrgInSourceA. Filter_x2: Exsync is generated for a forward rotation of the shaft encoder in double resolution, i.e., a trigger pulse for a rising edge of LineTrgInSourceA and a rising edge of LineTrgInSourceB. Filter_x4: Exsync is generated for a forward rotation of the shaft encoder in quad resolution, i.e., a trigger pulse for a rising and a falling edge of LineTrgInSourceA and a rising and a falling edge of LineTrgInSourceB.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.ShaftEncoderOn Property#
Enables or disbales the shaft encoder. Sets whether a single trigger input (off = A only) is used for the Exsync generation, or the signals A and B (on).
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SignalAnalyzer0CurrentPeriod Property#
Returns the last measured period of the selected source and polarity.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SignalAnalyzer0MaxPeriod Property#
Returns the maximum measured period of the selected source and polarity after reset.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SignalAnalyzer0MinPeriod Property#
Returns the minimum measured period of the selected source and polarity after reset.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SignalAnalyzer0Polarity Property#
Sets the signal analyzer 0 polarity.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SignalAnalyzer0PulseCount Property#
Returns the number of rising edges e.g. pulses of the selected source and of the polarity after reset.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SignalAnalyzer0Source Property#
Sets the signal source analyzer module 0.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SignalAnalyzer1CurrentPeriod Property#
Returns the last measured period of the selected source and polarity.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SignalAnalyzer1MaxPeriod Property#
Returns the maximum measured period of the selected source and the polarity after reset.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SignalAnalyzer1MinPeriod Property#
Returns the minimum measured period of the selected source and the polarity after reset.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SignalAnalyzer1Polarity Property#
Sets the signal analyzer module 0 polarity.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SignalAnalyzer1PulseCount Property#
Returns the number of rising edges e.g. pulses of the selected source and polarity after reset.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SignalAnalyzer1Source Property#
Sets the signal source analyzer module 0.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SignalAnalyzerClear Property#
Clears all measurement results.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SignalAnalyzerPulseCountDifference Property#
Use this read-only parameter to check the difference of the signal analyzer 0 and 1 pulse counter values (Analyzer 0 - Analyzer 1 value). This can be used to check for lost trigger signals, if analyzer 0 counts the ExSyc pulses and analyzer 1 counts the returned camera lines. In this case the difference is between 0 and 1 for single line cameras with no extra delay.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SoftwareTriggerIsBusy Property#
Indicates whether the software trigger is busy. This allows you to find out whether the trigger system is still processing software trigger pulses.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SoftwareTriggerQueueFillLevel Property#
Number of pulses in queue to be processed. The Queue parameter needs to be enabled for this.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.StatisticReadWriteTimeoutCount Property#
Number of timeouts during read and write operations when waiting for a response from the device.
Applies to: GigE and blaze
Visibility: Guru
The feature documentation may provide more information.
PLTransportLayer.Statistic_Last_Error_Status Property#
Last error status of a read or write operation.
Applies to: USB
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.Statistic_Last_Error_Status_Text Property#
Last error status of a read or write operation.
Applies to: USB
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.Statistic_Read_Operations_Failed_Count Property#
Number of failed read operations.
Applies to: USB
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.Statistic_Read_Pipe_Reset_Count Property#
Number of read pipe resets.
Applies to: USB
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.Statistic_Write_Operations_Failed_Count Property#
Number of failed write operations.
Applies to: USB
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.Statistic_Write_Pipe_Reset_Count Property#
Number of write pipe resets.
Applies to: USB
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.StreamDisplayName Property#
User-friendly name of the selected stream.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.StreamID Property#
Device-wide unique ID of the data stream.
Applies to: CoaXPress and blaze
Visibility: Beginner
Selected by: StreamSelector
The feature documentation may provide more information.
PLTransportLayer.StreamSelector Property#
Sets the stream channel. The parameter is 0-based in order to match the index of the C interface.
Applies to: CoaXPress and blaze
Visibility: Beginner
Selecting Parameters: StreamID
The feature documentation may provide more information.
PLTransportLayer.StrobePulseDelay Property#
The delay of the flash signal in lines with respect to the image trigger input signal with respect to ExSync.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorByteAlignment8b10bLocked Property#
Byte Alignment 8b10b locked
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorChannelCurrent Property#
Returns the Channel Current.
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorChannelCurrentSelector Property#
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorChannelVoltage Property#
Returns the Channel Voltage.
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorChannelVoltageSelector Property#
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorCurrentLinkSpeed Property#
Returns the current PCIe link speed in Gibibyte (2^30 byte).
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorCxpImageLineMode Property#
This parameter informs about the current transfer mode used by the camera. The transfer mode can be an area scan (= 0) or line scan (= 1) image.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorDisparity8b10bError Property#
Disparity 8b 10b errors
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorExternalPower Property#
Shows the external power state of the board.
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorFpgaTemperature Property#
Returns the current FPGA die temperature.
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorFpgaVccAux Property#
Returns the current FPGA auxiliary Vcc.
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorFpgaVccBram Property#
Returns the current FPGA BRAM Vcc.
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorFpgaVccInt Property#
Returns the current FPGA internal Vcc.
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorNotInTable8b10bError Property#
Not in table 8b 10b errors
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorPacketbufferOverflowCount Property#
The number of overflows that occur due to a not correct package order.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorPacketbufferOverflowSource Property#
The port, which has overflows due to a not correct package order.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorPcieTrainedPayloadSize Property#
Returns the PCIe trained payload size.
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorPcieTrainedRequestSize Property#
Returns the PCIe trained request size.
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorPortBitRate Property#
Returns the port bit rate
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorPowerOverCxpState Property#
Shows the current power over CXP state.
Applies to: CoaXPress
Visibility: Beginner
The feature documentation may provide more information.
PLTransportLayer.SystemmonitorUsedCxpConnections Property#
The currently used number of CXP ports used in this process.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TapGeometry Property#
Select the tap geometry according to the GenICam SFNC.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerAcknowledgementCount Property#
Number of trigger acknowledgement packets sent by the camera (in response to trigger edge packets sent before) have been received by the frame grabber.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerCameraOutSelect Property#
Sets the output source to be connected to a camera signal channel.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerEventCount Property#
Number of trigger events sent to the camera.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerExceededPeriodLimits Property#
Returns whether the input signal frequency exceeded the maximum specified. If the parameter returns Yes, signals were dropped.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerExceededPeriodLimitsClear Property#
Clears the Trigger Exceeded Period Limits parameter.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerFrontOutGPO0Polarity Property#
Sets the front GPO 0 signal polarity. This parameter is ignored if the source is VCC or GND.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerFrontOutGPO1Polarity Property#
Sets the front GPO 1 signal polarity. This parameter is ignored if the source is VCC or GND.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerInDebounce Property#
Input debounce time for trigger input signals (in microseconds). This parameter allows you to filter out invalid signals by specifying a minimum signal length.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerInDownscale Property#
Factor by which the trigger input signal is downscaled.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerInDownscalePhase Property#
Phase for selecting the desired pulse in the sequence.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerInPolarity Property#
Sets the polarity of the trigger input signal.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerInSource Property#
Sets the trigger input source for external trigger mode.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerInStatisticsFrequency Property#
Current frequency of the input pulses.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerInStatisticsMaximumFrequency Property#
Maximum input frequency detected.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerInStatisticsMinimumFrequency Property#
Minimum input frequency detected.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerInStatisticsMinMaxFrequencyClear Property#
Clears the minimum and maximum frequency values.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerInStatisticsPolarity Property#
Sets the polarity of the trigger input signal for statistics.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerInStatisticsPulseCount Property#
Number of input pulses.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerInStatisticsPulseCountClear Property#
Clears the input signal pulse counter.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerInStatisticsSource Property#
Sets the trigger input source for statistics.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerMultiplyPulses Property#
Upscales, i.e., duplicates, the number of trigger pulses generated externally or via software with the period specified by the Trigger Output Frequency parameter.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutFrontGPO0Source Property#
Sets the signal source for the front GPO 0 output.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutFrontGPO1Source Property#
Sets the signal source for the front GPO 1 output.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutGPO0Polarity Property#
Sets the GPO 0 signal polarity. This parameter is ignored if the source is VCC or GND.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutGPO0Source Property#
Sets the signal source for GPO 0 output.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutGPO1Polarity Property#
Sets the GPO 1 signal polarity. This parameter is ignored if the source is VCC or GND.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutGPO1Source Property#
Sets the signal source for GPO 1 output.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutGPO2Polarity Property#
Sets the GPO 2 signal polarity. This parameter is ignored if the source is VCC or GND.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutGPO2Source Property#
Sets the signal source for GPO 2 output.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutGPO3Polarity Property#
Sets the GPO 3 signal polarity. This parameter is ignored if the source is VCC or GND.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutGPO3Source Property#
Sets the signal source for GPO 3 output.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutGPO4Polarity Property#
Sets the GPO 4 signal polarity. This parameter is ignored if the source is VCC or GND.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutGPO4Source Property#
Sets the signal source for GPO 4 output.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutGPO5Polarity Property#
Sets the GPO 5 signal polarity. This parameter is ignored if the source is VCC or GND.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutGPO5Source Property#
Sets the signal source for GPO 5 output.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutGPO6Polarity Property#
Sets the GPO 6 signal polarity. This parameter is ignored if the source is VCC or GND.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutGPO6Source Property#
Sets the signal source for GPO 6 output.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutGPO7Polarity Property#
Sets the GPO 7 signal polarity. This parameter is ignored if the source is VCC or GND.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutGPO7Source Property#
Sets the signal source for GPO 7 output.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutputEventSelect Property#
Select the pulse form generator for event monitoring.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutputFrequency Property#
Maximum trigger output frequency. If the internal generator is used, it will use the frequency specified there. If an external source is used, this value determines the maximum allowed value. External trigger signals exceeding this value will be discarded. For more information, see the applet documentation.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutSelectFrontGPO0 Property#
Sets the output source of Front GPO 0.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutSelectFrontGPO1 Property#
Sets the output source of Front GPO 1.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutSelectGPO0 Property#
Sets the output source of GPO 0.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutSelectGPO1 Property#
Sets the output source of GPO 1.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutSelectGPO2 Property#
Sets the output source of GPO 2.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutSelectGPO3 Property#
Sets the output source of GPO 3.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutSelectGPO4 Property#
Sets the output source of GPO 4. This parameter is not available on Light Bridge.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutSelectGPO5 Property#
Sets the output source of GPO 5. This parameter is not available on Light Bridge.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutSelectGPO6 Property#
Sets the output source of GPO 6. This parameter is not available on Light Bridge.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutSelectGPO7 Property#
Sets the output source of GPO 7. This parameter is not available on Light Bridge.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutStatisticsPulseCount Property#
Number of output pulses.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutStatisticsPulseCountClear Property#
Clears the output signal pulse counter.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerOutStatisticsSource Property#
Sets the output source for statistics.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerPulseFormGenerator0Delay Property#
Delay between the input and the output of the pulse form generator.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerPulseFormGenerator0Downscale Property#
Downscale factor at the pulse form generator input.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerPulseFormGenerator0DownscalePhase Property#
Phase for selecting the desired pulse in the sequence.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerPulseFormGenerator0Width Property#
Width of the output signal.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerPulseFormGenerator1Delay Property#
Delay between the input and the output of the pulse form generator.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerPulseFormGenerator1Downscale Property#
Downscale factor at the pulse form generator input.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerPulseFormGenerator1DownscalePhase Property#
Phase for selecting the desired pulse in the sequence.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerPulseFormGenerator1Width Property#
Width of the output signal.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerPulseFormGenerator2Delay Property#
Delay between the input and the output of the pulse form generator.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerPulseFormGenerator2Downscale Property#
Downscale factor at the pulse form generator input.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerPulseFormGenerator2DownscalePhase Property#
Phase for selecting the desired pulse in the sequence.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerPulseFormGenerator2Width Property#
Width of the output signal.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerPulseFormGenerator3Delay Property#
Delay between the input and the output of the pulse form generator.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerPulseFormGenerator3Downscale Property#
Downscale factor at the pulse form generator input.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerPulseFormGenerator3DownscalePhase Property#
Phase for selecting the desired pulse in the sequence.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerPulseFormGenerator3Width Property#
Width of the output signal.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerQueueFillLevel Property#
Fill level of the trigger queue.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerQueueFillLevelEventOffThreshold Property#
The threshold for turning the queue fill level off.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerQueueFillLevelEventOnThreshold Property#
The threshold for turning the queue fill level on.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerQueueMode Property#
Enables/disable the trigger queue mode. The maximum output frequency is specified by the Trigger Output Frequency parameter.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerState Property#
Sets the state of the trigger system. The state of the trigger system is related to the trigger mode. This parameter enables or disables the trigger processing.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.TriggerWaveViolation Property#
Indicates a distance of two trigger edges violating the minimum edge frequency.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.UncorrectedErrorCount Property#
Number of uncorrected errors. Bit[2] indicates multiple byte errors in CXP stream packets.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.VantagePoint Property#
Vantage point. Use for mirroring. If VantagePoint is set to TopRight or BottomRight Width + XOffset must be smaller than SensorWidth. If VantagePoint is set to BottomLeft or BottomRight, the Height + YOffset must be smaller than SensorHeight.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.Width Property#
Width of the image ROI on the host side. This parameter is linked with the Width camera parameter. If the camera parameter changes, the host parameter changes accordingly, but not vice versa. The host parameter should not be set to a value different from the camera parameter.
Applies to: CoaXPress
Visibility: Expert
The feature documentation may provide more information.
PLTransportLayer.WriteTimeout Property#
Write access timeout in milliseconds.
Applies to: GigE
Visibility: Beginner
The feature documentation may provide more information.